Rki-instruments RX-517 User Manual download pdf (Page 14)

PT0E-0730

３−７．Peak SW value mode

When press PEAK SW during operation, the peak valve from power on to the current point (HC,

H2S = MAX, O2=MIN) shall be shown.

When hold and press ESC key for 3 sec during the peak value display, the peak value shall be

cleared.

３−８．Power pump ON/OFF

When move the sampling point and stop to operate temporarily, the pump only stops operation.

When stop the pump operation, the power consumption shall be reduced by about 40%. Then

the other than pump is on active and once the pump re-starts up, this shall start operation

immediately.

Peak mode

Operation mode

ESC SW

P E A K

Operation mode

Peak mode

PEAK SW

P E A K

【RX-517】

H2S change over

P E A K

H2S high display

Peak display

＊Note

《RX-517 case》

・In the H2S high display, the peak value of H2S is displayed.

・When changed from peak display, it changes to the operation display.

【RX-516／517】

PEAK key

＊Note

・When do not operate for the time being, make off the power. Other than pump is active

and if it is left alone, the battery is consumed up.

＊注記

《RX-517 case》

All peak value is cleared on both the displays of HC, O2, H2S low and the another one

of H2S high.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

No comments

Rki-instruments RX-517 User Manual Page 14