RKI Instruments GX-2003 Operator's Manual download pdf (Page 62)

55 • Using Setup Mode GX-2003 Operator’s Manual

4. Press and release the POWER ENTER button to save the new

alarm point and move to the next set alarm screen.

5. Repeat step 3 and 4 to update additional alarms while in the

desired set alarm screen.

6. Press and release the POWER/ENTER button repeatedly until you

return to the screen that displays all the detection channels.

7. Repeat steps 2 through 6 until all desired alarms are updated.

8. To exit ALARM POINTS, use the (SHIFT)▼ button to move the

cursor to the last menu item on the screen, then press and release

the (SHIFT)▼ button again. The ESCAPE message displays.

9. Press and release the POWER ENTER button to save the settings

and return to the main menu.

Updating the Lunch Break Setting

With LUNCH BREAK set to OFF (factory setting), the GX-2003

automatically starts new TWA and PEAK reading collection and

resets the time in operation at start up.

With LUNCH BREAK set to ON, the Resume Datalog Screen displays

during start up. From this screen, you can choose to continue

accumulating TWA and PEAK readings and the time in operation

from the last time the GX-2003 was used or start collecting new

readings.

1. From the main menu, place the cursor next to the LUNCH BREAK

menu item. Press and release the POWER ENTER button.

2. Use the ▲AIR or (SHIFT)▼ button to display the desired setting.

3. Press and release the POWER/ENTER button to save the setting

and return to the main menu.

LUNCH BREAK

OFF

21:09

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 93 94

No comments

RKI Instruments GX-2003 Operator's Manual Page 62